6005 aluminum alloy plate is Al-Mg-Si heat treatable aluminum alloy, extrusion processing, forging performance, anodizing, corrosion resistance. Good formability, weldability, machinability, medium strength, good operability after annealing, mainly used for mechanical structure, including bars, plates, pipes and profiles, etc. 6005 aluminum...

Alloy 6082 is typically supplied as plate and sheet from Mingtai Al. it is an aluminum primarily alloyed with silicon and manganese. The addition of manganese controls the grain structure which in turn results in a stronger alloy. The most common tempers for 6082 aluminum are O, T4, T6 and T651 and 6082 is slightly higher mechanical properties in...

6101 aluminum alloy is a kind of aluminum-magnesium heat treatable wrought alloy, prominent in bus conductor products, with high strength of conductive material, corrosion resistance, and good weldability. Mingtai Aluminum can produce 6061 aluminum plate for car lightweight use. The highlights of 6101 aluminum plate: 1,Excellent...

Mingtai Al. is both a 5083 aluminum plate manufacturer and supplier with 18 years experience. So factory price is available. Besides, we use the finest raw material to improve the product quality, and we are certificated to CCS (China Classification Society) and DVN GL (Norske Veritas), guaranteeing the quality of our 5083 aluminum sheet lives to...

5251 aluminum alloy is Al-Mg antirust aluminum alloy, no heat treatment. The magnesium content of the alloy is low, the plasticity is high, the formability is good, and the cold deformation can improve the strength of the alloy. The alloy has good corrosion resistance and is suitable for use in marine environment. Good weldability of alloy. Semi...

5005 al-mg alloy aluminum sheet and the strength of the equivalent of 3003, welding, good workability, the aluminum alloy and aluminum alloy is similar to the 3003, with medium strength and good corrosion resistance. The anodic oxide film is brighter than the 3003 alloy, and is consistent with the tone of the 6063 alloy aluminum...

5454 aluminum sheet(http://www.aluminiumplatesupplier.com/5454_aluminum_sheet.html), with thickness between 0.2mm-6mm and magnesium content between 2.4% - 3.0% by weight, belongs to low-magnesium and non-heat-treatable alloy, has little higher strength than 5052 aluminum alloy, and is the preferred alloy choice for storing hot...

5052 aluminum sheet (http://www.mtalum.com/aluminum_sheet/high-quality-5052-aluminum-alloy-sheet-price-in-mexico.html) of Mingtai Al. is certificated to ASTM B209 and it can be cut to size at customers’ need. The main content is Mg, which improve the strength of 5052 aluminum sheet. Products with different thickness have different tensile and...

2024 aluminium plate for the aluminum - copper - magnesium Department of the typical hard aluminum alloy, its composition is reasonable, comprehensive performance is better. Many countries produce this alloy, is the largest amount of hard aluminum. The alloy is characterized by: high strength, a certain degree of heat resistance, can be used as...

2A12 aluminum alloy is a high-strength duralumin aluminum, can be heat strengthened; 2A12 aluminum alloy spot welding is good, there has a tendency to forme the intercrystalline cracking by oxyacetylene welding and argon arc welding time; 2A12 aluminum alloy after strain hardening its machinabiliity still good. Corrosion resistance is not high,...